还剩11页未读,继续阅读
本资源只提供10页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
文本内容:
Crestron与TwinCAT采用TCP/IP通讯配置环境要求Crestron软件TwinCAT(当前为
2.
11.1545)TwinCAT_Crestron_Server(当前为
3.
0.14)原理如下图软件____Crestron__软件和__方法可以向Crestron__分公司____TwinCAT可参考TwinCAT__文档__TwinCAT_Crestron_Server
1、XP系统在Beckhoff__光盘Software\TwinCAT\Supplement\TwinCAT_Crestron_Server\Install路径下双击TcCrestronSrv.exe按下图进行__输入__序列号依照__向导完成____成功后可在__路径下找到..\TwinCAT\__\CrestronServer..\TwinCAT\CrestronServer.重启系统后在桌面又下角出现可以出现图标,双击该图标弹出表明TwinCAT_Crestron_Server已经成功__并启动
2、__系统在XP系统的“..\TwinCAT\__\CrestronServer__”路径下依照__系统通过FTP拷贝ARM或X86的CAB文件到控制器按下图__重启系统后同样可以看到下图
3、Crestron宏加载在“..\TwinCAT\CrestronServer\CrestronModule”路径下拷贝BeckhoffCommunication.zip到自己新建的工程路径下并解压,把Usr__cro与Usrsplus内文件合并到一块如下图,从HTML帮助文档中下载示例程序并解压到当前目录,双击“Crestron_______Windows_WriteIntSample.__w”文件,打开示例程序,宏文件自动导入按下图配置IP地址配置端口为4__07编译下载程序到Crestron控制器如Ip为:
192.
168.
2.116置高电平,只有置高电平后才能启动程序已经接受到TwinCATPLC中MW1变量值为16#55PLC程序如下。