还剩17页未读,继续阅读
本资源只提供10页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
文本内容:
户外led调研报告LED进入泰国、越南市场调研分析近几年来,随着人们对半导体发光材料研究的不断深入,中国将成为全球LED市场发展的主要驱动力量,LED照明市场中的户外照明市场由公共预算采购决定,而室内、背光和其他的应用则更多地与宏观经济正相关2012年,中国政府将在民用和商用领域广泛采用LED照明的绿能方案,这有望帮助陷入全球经济衰退泥淖的LED产业获得复苏、目标市场机会分析
1、泰国零关税,LED亮化工程需求量大据开泰研究中心分析,2012年泰国照明市场总值约为14亿元人民币规模,其中LED约占12%,预计到2015年占比将提高至45%-50%o目前,泰国政府正在大力实施亮化工程,对LED的需求量加大中国企业只要获得中国国内的原产地证明,LED产品出口到泰国就可以享受零关税,而
1.3LED的发光原理发光二极管是由ffi-W族化合物,如GaAs(碑化钱)、GaP(磷化铁)、GaAsP(磷碑化钱)等半导体制成的,其核心是PN结因此它具有一般P-N结的I-N特性,即正向导通,反向截止、击穿特性此外,在一定条件下,它还具有发光特性在正向电压下,电子由N区注入P区,空穴由P区注入N区进入对方区域的少数载流子(少子)一部分与多数载流子(多子)复合而发光假设发光是在P区中发生的,那么注入的电子与价带空穴直接复合而发光,或者先被发光中心捕获后,再与空穴复合发光除了这种发光复合外,还有些电子被非发光中心(这个中心介于导带、介带中间附近)捕获,而后再与空穴复合,每次释放的能量不大,不能形成可见光发光的复合量相对于非发光复合量的比例越大,光量子效率越高由于复合是在少子扩散区内发光的,所以光仅在靠近PN结面数nm以内产生理论和实践证明,光的峰值波长入与发光区域的半导体材料禁带宽度Eg有关,即F1240/Eg(mm)式中Eg的单位为电子伏特eVo若能产生可见光波长在380nm紫光〜780nm红光,半导体材料的Eg应在
3.26〜L63eV之间比红光波长长的光为红外光现在已有红外、红、黄、绿及蓝光发光二极管,但其中蓝光二极管成本、价格很高,使用不普遍
1.4LED光源的特点1电压led使用低压电源,供电电压在6-24v之间,根据产品不同而异,所以它是一个比使用高压电源更安全的电源,特别适用于公共场所2效能消耗能量较同光效的白炽灯减少80%3适用性很小,每个单元led小片是3-5mm的正方形,所以可以制备成各种形状的器件,并且适合于易变的环境4稳定性10万小时,光衰为初始的50%5响应时间其白炽灯的响应时间为毫秒级,led灯的响应时间为纳秒级
(6)对环境污染无有害金属汞
(7)颜色改变电流可以变色,发光二极管方便地通过化学修饰方法,调整材料的能带结构和带隙,实现红黄绿兰橙多色发光如小电流时为红色的led,随着电流的增加,可以依次变为橙色,黄色,最后为绿色
(8)价格led的价格比较昂贵,较之于白炽灯,几只led的价格就可以与一只白炽灯的价格相当,而通常每组信号灯需由上300〜500只二极管构成
1.5LED分类
1、按发光管发光颜色分按发光管发光颜色分,可分成红色、橙色、绿色(又细分黄绿、标准绿和纯绿)、蓝光等另外,有的发光二极管中包含二种或三种颜色的芯片根据发光二极管出光处掺或不掺散射剂、有色还是无色,上述各种颜色的发光二极管还可分成有色透明、无色透明、有色散射和无色散射四种类型散射型发光二极管和达于做指示灯用
2、按发光管出光面特征分按发光管出光面特征分圆灯、方灯、矩形、面发光管、侧向管、表面安装用微型管等形灯按直径分为(p2mm、(p
4.4mm(p5mm、q)8mm(plOmm及(p20mm等国外通常把(p3mm的发光二极管记作T-1;把(p5mm的记作T-1(3/4);把(p
4.4mm的记作T-1(1/4)由半值角大小可以估计圆形发光强度角分布情况从发光强度角分布图来分有三类
(1)高指向性一般为尖头环氧封装,或是带金属反射腔封装,且不加散射剂半值角为5〜20或更小,具有很高的指向性,可作局部照明光源用,或与光检出器联用以组成自动检测系统
(2)标准型通常作指示灯用,其半值角为20〜45
(3)散射型这是视角较大的指示灯,半值角为45〜90或更大,散射剂的量较大
3、按发光二极管的结构分按发光二极管的结构分有全环氧包封、金属底座环氧封装、陶瓷底座环氧封装及玻璃封装等结构
4、按发光强度和工作电流分按发光强度和工作电流分有普通亮度的LED(发光强度lOOmcd);把发光强度在10〜lOOmed间的叫高亮度发光二极管一般LED的工作电流在十几mA至几十mA,而低电流LED的工作电流在2mA以下(亮度与普通发光管相同)除上述分类方法外,还有按芯片材料分类及按功能分类的方法第二章LED的应用及制作
2.1LED的应用鉴于LED的自身优势,目前主要应用于以下几大方面:
(1)显示屏、交通讯号显示光源的应用LED灯具有抗震耐冲击、光响应速度快、省电和寿命长等特点,广泛应用于2种室内、户外显示屏,分为全色、三色和单色显示屏,全国共有100多个单位在开发生产交通信号灯主要用超高亮度红、绿、黄色LED,因为采用LED信号灯既节能,可靠性又高,所以在全国范围内,交通信号灯正在逐步更新换代,而且推广速度快,市场需求量很大,是个很好的市场机会
(2)汽车工业上的应用汽车用灯包含汽车内部的仪表板、音响指示灯、开关的背光源、阅读灯和外部的刹车灯、尾灯、侧灯以及头灯等汽车用白炽灯不耐震动撞击、易损坏、寿命短,需要经常更换1987年,我国开始在汽车上安装高位刹车灯由于LED响应速度快,可以及早提醒司机刹车,减少汽车追尾事故,在发达国家,使用LED制造的中央后置高位刹车灯已成为汽车的标准件,美国HP公司在1996年推出的LED汽车尾灯模组可以随意组合成各种汽车尾灯此外,在汽车仪表板及其他各种照明部分的光源,都可用超高亮度发光灯来担当,所以均在逐步采用LED显示我国汽车工业正处于大发展时期,是推广超高亮度LED的极好时机近几年内会形成年产10亿元的产值,5年内会形成每年30亿元的产值
(3)LED背光源以高效侧发光的背光源最为引人注目,LED作为LCD背光源应用,具有寿命长、发光效率高、无干扰和性价比高等特点,已广泛应用于电子手表、手机、BP机、电子计算器和刷卡机上,随着便携电子产品日趋小型化,LED背光源更具优势,因此背光源制作技术将向更薄型、低功耗和均匀一致方面发展LED是手机关键器件,一部普通手机或小灵通约需使用10只LED器件,而一部彩屏和带有照相功能的手机则需要使用约20只LED器件现阶段手机背光源用量非常大,一年要用35亿只LED芯片目前我国手机生产量很大,而且大部分LED背光源还是进口的,对于国产LED产品来说,这是个极好的市场机会
(4)LED照明光源早期的产品发光效率低,光强一般只能达到几个到几十个med,适用在室内场合,在家电、仪器仪表、通讯设备、微机及玩具等方面应用目前直接目标是LED光源替代白炽灯和荧光灯,这种替代趋势已从局部应用领域开始发展日本为节约能源,正在计划替代白炽灯的发光二极管项目(称为“照亮日本”),头五年的预算为50亿日元,如果LED替代半数的白炽灯和荧光灯,每年可节约相当于60亿升原油的能源,相当于五个
1.35xl06kW核电站的发电量,并可减少二氧化碳和其它温室气体的产生,改善人们生活居住的环境我国也于2004年投资50亿大力发展节能环保的半导体照明计划
(5)其它应用例如一种受到儿童欢迎的闪光鞋,走路时内置的LED会闪烁发光,仅温州地区一年要用5亿只发光二极管;利用发光二极管作为电动牙刷的电量指示灯,据国内正在投产的制造商介绍,该公司已有少量保健牙刷上市,预计批量生产时每年需要3亿只发光灯;正在流行的LED圣诞灯,由于造型新颖、色彩丰富、不易碎破以及低压使用的安全性,近期在香港等东南亚地区销势强劲,受到人们普遍的欢迎,正在威胁和替代现有电泡的圣诞市场篇三LED市场调研报告-LED灯饰市场调研报告经过这次对LED市场的调研考察,我做出了以下结论:
一、市场现状及价格考察中发现现在消费群众对LED灯饰产品还不是很认可,第一感觉价格高,第二对产品不了解,所以消费者只有拿价格对比了在考察过程中一位经销商说过一句话,说“这种高科技产品就是给我们老百姓制造的,有钱人就不需要这种高节能东西人家不在乎那几个电费钱在市场中LED每一种产品都分着高端、中端、低端,比如高端产品3W的球泡灯27-41元不等、中端22・27元不等、低端9-
16.5元不等,3W的射灯高、中端一般在33-88元不等,低端15-26元不等,功率越大的价位就越高,目前高端产品只被部分消费者接受,大部分消费者选择的还是低端产品,随着社会的进展往后广大消费者一定会接受LED这种产品,并把它融入到生活中
二、市场种类及销量目前在灯饰市场LED照明产品几乎覆盖了整个市场,每家商户都有LED的产品,品牌也及多,比如;雷士照明、飞利浦照明、三雄极光、嘉美照明等五花八门,竞争很激烈,每个品牌的产品种类非常多,使用范围也很广泛,如led亮化系列、led商业照明、led家居照明、led灯带、led吸顶灯、led灯泡、led灯管、led路灯、led射灯筒灯、led工矿灯、led面板灯等一应俱全,目前LED市场最受欢迎销量最多的产品:
1、led射灯、led筒灯、led面板灯、led吸顶灯,消费人群:商场、店面、办公楼、酒店、宾馆、家庭装修等
2、led灯带、led灯管、led工矿灯,消费人群建筑亮化、酒店、户外亮化、工厂、商场、建筑工地等
三、下一步的工作切入点在考察中我发现品牌的影响力也非常关键,比如飞利浦照明、雷士照明的产品在市场中占最多,品牌知名度高了,无形中销售量也就提升了我建议我们公司也需加大力度宣传我们的产品,广告宣传、网络宣传、网络销售等,如需的话我们公司也在市场上也开一个门市作为宣传的同时也可营销一般市场中的经销商服务都非常的热情,也正因为他们的热情让一些客户不好意思离开,他们也有自己的推销员和销售渠道且在泰国的价格是国内的2-3倍
2、越南投资基础设施的建设,LED照明前景可观据越南建设部公布的《2011-2020年国家城市发展规划》草案,2011-2020年越南城市发展总投资为1098万亿盾(约500亿美元),到2015年全国城市化水平将达38%根据该规划,2011-2015年的城市发展投资额包括新建设施投资200亿美元,市容改造投资30亿美元;2016-2020年为270亿美元,包括新建设施投资240亿美元,市容改造投资30亿美元这意味着LED照明在越南市场存在着巨大的扩展潜力
二、消费者的需求分析
1、泰国泰国绝大部分地区属热带季风气候,终年炎热多雨,出口到该国的产品需要在散热和防潮上加强防护
2、越南越南消费者对LED的质量十分看重,即使价格昂贵,他们谢谢公司,领导,给我这次的调研机会,让我更加坚信我们公司做的产品是前卫的,非常有前途的,让我对未来充满了信心报告人马啸仰日期:2012/6/8也要买质量好的产品,所以必须加强自身产品质量,做到价廉物美
三、泰国、越南市场分销渠道与经销商分析泰国、越南LED市场销售渠道主要有专业零售商、专业商店、批发商、商场、超级市场、进口组织、进口商独立的零售商和超级市场是LED的最重要的零售形式其次是商场但是泰国与越南销售渠道与数量不一致,泰国由于大量用于灾后重建,所以销售渠道批发大于零售,数量也相应增多越南无论在经济还是工业上都不比泰国强,更有一部分的商品来自泰国,所以数量相应减少按照零售价格的不同,泰国由于对中国进行了零关税,所以价格相应比越南要低
四、竞争者分析日本、台湾、韩国、欧美由LEDinside的数据显示,2009年LED封装财产在全球局限按地域散布如下日本封装企业产值稳居第一,2009年占全球LED封装产值的33%;中国台湾地域的封装企业位居第二,占全球的17%;而韩国企业近年加大LED封装行业的投入,产值由2008年的9%上升到2009年的15%;中国大陆企业LED封装行业全球市场据有率稳步上升,2009年市场据有率为ll%o当前差距仍很大有业界人士指出,国内上市的LED企业最大的营收不超越10亿元,台企收入已达50亿元,欧美巨子则约有70亿元由此可以看出,LED企业的处境仍然堪忧
五、总结因此,企业在进入泰国、越南LED市场采取的策略是:
(1)充分利用宏观环境中的一切有利之处,如配额扩大、减免税收等;
(2)盯住竞争者,发挥自身传统优势,在质量上把好关;
(3)利用多种渠道跟紧消费者需求变化,及时开发新产品;
(4)与经销商建立良好的关系;篇二LED产业发展调查报告LED与LED产业发展之路回顾与调查报告半导体技术与产业已经改变了世界大规模集成电路的计算机和国际互联网进入了我们社会的每一个层面人类以惊人的速度进入信息化时代,21世纪将是微电子和光电子共同发挥作用的时代,是未来信息社会的“基石”LED已经成为第三代半导体技术发展的切入点,也是发展光电子的突破口近20年来,人们一直在寻找绿色照明光源,欧洲专门制定了为期5年的行动计划,提出新型光源要符合的三个条件高效;低耗;材料对环境没污染,近似(模拟)自然光,显色指数接近
100.随着第三代半导体材料氮化钱(GaN)、的技术突破和蓝、绿、白光发光二极管(LightEmittingDiode)LED的问世,LED可望发展成为第四代光源,即半导体照明刖S今年来随着城市建设和电子信息产业的迅速发展,人们对光源的需求与日剧增,LED产业的开发、研制和生产已成为发展前景十分诱人的朝阳产业,显示出了巨大的发展潜力LED不仅可以用大型广告显示屏、交通信号指示灯、城市重点建设夜景照明等领域,而且正在迅速成为汽车的标准配置,尤其是白色LED已成为便携式电子产品显示屏的主要光源,LED技术的发展引起了国内外光源界的普遍关注,先已成为极具有发展前景和影响力的一项高新技术产品•中国LED封装市场调研报告2011本文结合国内外LED技术的发展方向,系统的介绍了Led技术的结构、特点、应用以及LED产业在全球以及国内的发展情况,重点介绍了国内LED产业的发展状况、国内LED产业的发展趋势,提出了国内LED产业存在问题和劣势,最后分析认为LED产业在国内有良好的发展前景第一章LED技术LED LightEmittingDiode,发光二极管,是一种固态的半导体器件,它可以直接把电转化为光LED的心脏是一个半导体的晶片,晶片的一端附在一个支架上,一端是负极,另一端连接电源的正极,使整个晶片被环氧树脂封装起来半导体晶片由两部分组成,一部分是P型半导体,在它里面空穴占主导地位,另一端是N型半导体,在这边主要是电子但这两种半导体连接起来的时候,它们之间就形成一个“P-N结”.当电流通过导线作用于这个晶片的时候,电子就会被推向P区,在P区里电子跟空穴复合,然后就会以光子的形式发出能量,这就是LED发光的原理而光的波长也就是光的颜色,是由形成P-N结的材料决定的
1.1LED的结构50年前人们已经了解半导体材料可产生光线的基本知识,第一个商用二极管产生于1960年LED是英文lightemittingdiode(发光二极管)的缩写,它的基本结构是一块电致发光的半导体材料,置于一个有引线的架子上,然后四周用环氧树脂密封,起到保护内部芯线的作用,所以LED的抗震性能好LED结构图如下图所示发光二极管的核心部分是由p型半导体和n型半导体组成的晶片,在p型半导体和n型半导体之间有一个过渡层,称为p-n结在某些半导体材料的PN结中,注入的少数载流子与多数载流子复合时会把多余的能量以光的形式释放出来,从而把电能直接转换为光能PN结加反向电压,少数载流子难以注入,故不发光这种利用注入式电致发光原理制作的二极管叫发光二极管,通称LED.当它处于正向工作状态时(即两端加上正向电压),电流从LED阳极流向阴极时,半导体晶体就发出从紫外到红外不同颜色的光线,光的强弱与电流有关
1.2LED特点LED的内在特征决定了它是最理想的光源去代替传统的光源,它有着广泛的用途
(1)体积小LED基本上是一块很小的晶片被封装在环氧树脂里面,所以它非常的小,非常的轻
(2)耗电量低LED耗电非常低,一般来说LED的工作电压是2-
3.6V工作电流是
0.02-
0.034这就是说它消耗的电不超过
0.1W.
(3)使用寿命长在恰当的电流和电压下,LED的使用寿命可达10万小时4高亮度、低热量比HID或白炽灯更少的热辐射5环保LED是由无毒的材料作成,不像荧光灯含水银会造成污染,同时LED也可以回收再利用o红光LED含有大量的As碑,剧毒6坚固耐用LED是被完全的封装在环氧树脂里面,它比灯泡和荧光灯管都坚固灯体内也没有松动的部分,这些特点使得LED可以说是不易损坏的7可控性强可以实现各种颜色的变化。